Home-Knowledge-

Content

Container Loading Process & Photo Taking Steps

Mar 18, 2026

Essential for Foreign Trade: Container Loading Photo Steps
1.Confirm Container Information
Verify the relevant container details, including the container number and seal number.

 

2.Inspect Container Condition
Carefully check the container for any damage, ensuring there are no issues of water leakage or light leakage.

 

3. Take Photos of the Empty Container
Before starting loading, take several photos of the inside of the empty container for later comparison.

 

Take Initial Loading Photos (1% Loading Volume)

 

When goods are just starting to be loaded into the container, take a photo showing approximately 1% of the loading volume.

 

4. Take Photos at Different Loading Stages

 

25% Loading Volume Photo: Take an internal photo when the container is approximately one-quarter full.

 

50% Loading Volume Photo: Take another internal photo when the container is half full.

 

75% Loading Volume Photo: Take another internal photo when the container is approximately three-quarters full.

 

Take Full Container Photos (100% Loading Volume)

 

After the container is completely filled, take several photos showing the fully loaded status.

 

5. Take Photos of Secured Cargo

If the cargo inside the container needs to be secured with nets or other methods, please take photos of these securing measures.

 

6. Take Photo of Closed Right Side Door
After closing the right side door of the container, take a photo to record its status.

 

7. Take Photo of Both Closed & Locked Doors
Ensure that both side doors are closed and locked, then take a full-body photo.

 

8. Take Photo of Locked Seal
Finally, take a photo showing that the container seal is locked, and record the seal number.
 

SEND INQUIRY

SEND INQUIRY